Figure 5-32.Edit Spanning Bridge Interface - ADC MM702G2-W V5.x User Manual

Chapter 5: Configure LAN, WAN, and SHDSL
Step
2 Click Edit (Figure
3 Edit the following parameter (as appropriate):
• Priority
The modem STP priority (how centrally located this bridge is) in the network. A lower number indicates
a more centrally located bridge. The valid priority range is 0 to 65535. Default is 128.
• Path Cost
Default is 10.
4 Click Change to change the parameters or click Reset to keep the current settings.
5-38
5-31). Figure 5-32 is displayed. Click Edit Spanning Bridge Interface.
Figure 5-32. Edit Spanning Bridge Interface
Action
MM702G2-W-UM-03