Chapter 6: Configuring Advanced Features
Step
6
From the Firewall Port Filters: External-Internal screen
Filter.
Figure 6-11
7
Configure the following parameters for each session:
• Source Address – Values are IP Address and Mask. Default is 0.0.0.0.
• Destination Address – Values are IP Address and Mask. Default is 0.0.0.0.
• IP Protocol – Default is 0.
• Direction – Values for Inbound and Outbound are Allow and Block. Default is Allow.
8
Click Apply.
6-12
is displayed.
Figure 6-11. Add Raw IP Filter
Action
(Figure 6-9 on page
6-10), click Add Raw IP
MM702G2-W-UM-03