Reset To Factory Defaults Using The Reset Button; Figure 7-6. Restore Factory Defaults-Reset Button - ADC MM702G2-W V5.x User Manual

Megabit modem
Hide thumbs Also See for MM702G2-W V5.x:
Table of Contents

Advertisement

Chapter 7: Maintenance

Reset to Factory Defaults using the Reset Button

The reset button on the back panel of your modem is provided to reboot the modem without the need to remove
power. Under normal circumstances, you will not have to use the reset button. On rare occasions, however, your
modem may not respond.
Step
1
Locate the Reset button on the modem's rear panel
2
Use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the Reset
button. Hold down on the button for more than 5 seconds to restore all factory default settings.
Holding down on the Reset button for LESS than 5 seconds causes the modem to
IMPORTANT
reboot.
!
Holding down on the Reset button for MORE than 5 seconds causes the modem to
restore all factory defaults.
• Using the Web Interface, see "Restart/Set Factory Default" on page 7-5.
7-6
Action
Figure 7-6. Restore Factory Defaults—Reset Button
(Figure
7-6).
MM702G2-W-UM-03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM702G2-W V5.x and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents