Table of Contents
Advertisement
A
CCESSING THE
Use the Web interface to set up and manage the modem. This chapter provides steps to help you access the Web
interface pages for configuration and management of the modem.
A
IP A
SSIGN
DDRESSES
To access the modem Web interface, the management PC must be on the same LAN
IP subnet as the modem. Default values are shown to the right. Do one of the following:
• Change the management PC IP address so that it is on the same subnet as the
modem (go to
Step 1
• Change the IP address of the modem 10/100Base-T (LAN) port to a value
assigned by your network administrator.
Use the following steps to set up a management PC to be on the same subnet with the
modem. (The example shows instructions for a PC that is running Microsoft Windows 2000; instructions for other
operating systems may differ slightly.)
Step
1
From the Windows desktop, choose Start|Settings|Control Panel to open the Control Panel dialog.
2
From the Control Panel dialog, double-click the Network icon (shown to the right).
The Network dialog is displayed.
3
From the Configuration tab, double-click TCP/IP to display the TCP/IP Properties dialog
4
The modem can be set up to serve IP addresses to devices on the LAN (DHCP server feature). Do one of
the following:
• If DHCP server has not been enabled on the modem (default setting), select Specify an IP address.
• If DHCP server has been enabled on the modem, select Obtain an IP address automatically and go
to
Step
6.
MM702G2-W-UM-03
W
I
EB
NTERFACE FOR
below).
Figure 2-1. TCP/IP Properties
M
M
ODEM
Action
Chapter
ANAGEMENT
Modem Defaults
Subnet:
192.168.0.0
Subnet Mask:
255.255.255.0
IP Address:
192.168.0.1
(Figure
2
2-1).
2-1
Advertisement
Table of Contents
