Figure 6-42.Create Destination Mac Based Unicast Filtering Entry - ADC MM702G2-W V5.x User Manual

Chapter 6: Configuring Advanced Features
Step
2 To add a new Unicast Destination MAC Filtering entry, do the following:
a. On the Unicast Destination MAC Filtering page
Create New Entry.
b. Input the following interfaces:
– Name – Assign a Name.
– Destination MAC Address – Values are 6 hexadecimal pairs separated by a colon
(e.g., 00:20:2b:01:02:03).
– Entry Type – Default is Dest Static.
c. Click OK to add the parameters or click Reset to keep the current settings.
6-44
Figure 6-42 is displayed.
Figure 6-42. Create Destination MAC Based Unicast Filtering Entry
Action
(Figure 6-41 on page 6-43), click
MM702G2-W-UM-03