Figure 6-54.Add An Interface As The Multicast Router - ADC MM702G2-W V5.x User Manual

Chapter 6: Configuring Advanced Features
Step
2 Enter the following parameters for the IGMP Snoop Configuration:
– IGMP Snoop – Values are Disable, Enable and Drop. Default is Disable.
– Last Member Query Interval – Total queries. Default is 1.
– Query Interval – Amount of time inbetween the queries. Default is 125.
– Robustness Variable – Efficiency rate. Default is 2.
– Query Response Interval – How fast the query is returned. Default is 10.
– V1 Timer Value – The V1 time value. Default is 400.
– Multicast Interface Aging Time – Amount of time between a single sender and the multiple
receivers on the network. Default is 400.
– Mode – Values are SNOOPOnly and Proxy. Default is SNOOPOnly.
3 To add an interface as the multicast router, do the following:
a. On the IGMP Configuration page
Multicast Router.
b. Type the Name and click OK.
6-56
(Figure 6-53 on page
Figure 6-54 is displayed.
Figure 6-54. Add an Interface as the Multicast Router
Action
6-55), click Add an Interface as the
MM702G2-W-UM-03