Table of Contents
Advertisement
Configure the Remote LAN
Step
1
Select Configuration|LAN Connections to access the LAN Connections page
2
In the LAN Protocol box, confirm that the protocol is set to Bridged.
Any device (such as a PC) connecting to the modem LAN interface loses its connection when
the modem LAN IP address is changed. After the IP address is changed, you need to specify
this new address in the Web browser to reconnect a device.
MM702G2-W-UM-03
Figure 8-8. LAN Configuration—Configure Remote LAN
Chapter 8: Implementing a Point-To-Point LAN Extension
Action
(Figure
8-8).
8-9
Advertisement
Table of Contents
