Table of Contents
Advertisement
Configuring Static MAC Entries
C
ONFIGURING
When the modem's mode of operation is Bridge/Router RFC 1483 and the modem is configured
as a bridge, the modem forwards Ethernet frames based on MAC addresses. Up to 32 static
MAC entries can be added to the modem bridge MAC addres table.
Information
MAC Address
Source Port
Destination Port
Display Static MAC Entries
1
From the system menu, click static MAC table to open the Static MAC Table window.
2
Observe the list of MAC addresses.
Add a Static MAC Entry
1
From the
system
2
Click
Add
to display the Static MAC Address Entry window.
3
Configure the MAC Address parameters as defined above.
4
Click
Apply
to add the new data to the list.
Modify a Static MAC Entry
1
From the
system
2
Click
Select
of the address to be changed.
42
S
MAC E
TATIC
Description
The hardware address of a device.
The port receiving the frame.
The port that the traffic will be forwarded out of.
menu, click
static MAC table
menu, click
static MAC table
NTRIES
to open the Static MAC Table window.
to open the Static MAC Table window.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Advertisement
Table of Contents
Troubleshooting
