Avaya 9601 Administering page 70

Configuration through LLDP
System parameter
name
SIP_CONTROLL
ER_LIST
TLSSRVR and
HTTPSRVR
L2Q
POE_CONS_
SUPPORT
Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
70
TLV name Impact
This TLV is ignored if:
• The value of USE_DHCP is "0" and the value of IPADD is not
"0.0.0.0".
• The Application Type is not 1 (Voice) or 2 (Voice Signaling).
• The Unknown Policy Flag (U) is set to 1.
Proprietary Call SIP_CONTROLLER_LIST will be set to the IP addresses in this
Server TLV TLV value.
Proprietary File TLSSRVR and HTTPSRVR will be set to the IP addresses in
Server TLV this TLV value.
Proprietary 802.1 Q If TLV = 1, L2Q set to "1" (On).
Framing
If TLV = 2, L2Q set to "2" (Off).
If TLV = 3, L2Q set to "0" (Auto).
A check is made as to whether a reset is necessary to obtain a
new IP address due to a change in the values of the parameters
L2Q or L2QVLAN.
This TLV is ignored if:
• The value of USE_DHCP is "0" and the value of IPADD is not
"0.0.0.0".
• The current L2QVLAN value was set by an IEEE 802.1 VLAN
name.
• The current L2QVLAN value was set by a TIA LLDP MED
Network Policy (Voice) TLV.
Proprietary - PoE If the value of POE_CONS_SUPPORT is "1",
Conservation Level POE_CONS_MODE is set to the level requested in the TLV.
Request TLV
Comments on this document? infodev@avaya.com
Note:
This parameter cannot be used in an environment where
both SIP deskphones and H.323 deskphones exist.
August 2015