Setting The Dial Plan On Sip Deskphones - Avaya 9601 Administering

• PHNLDLENGTH - The maximum length, in digits, of the national telephone number for the
country in which the Communication Manager call server is located.
• PHNOL - The character(s) dialed to access public network local trunks on the Communication
Manager call server.
Note:
In all cases, the values you administer are the values relevant to the location of the
Communication Manager call server at which the deskphones are registered. For example, If a
deskphone is in Japan, but its Communication Manager call server is in the United States, set
the PHNCC parameter value to "1" for the United States.
In all cases, the digits the deskphones insert and dial are subject to standard Communication
Manager call server features and administration. This includes Class of Service (COS), Class of
Restriction (COR), Automatic Route Selection (ARS), and so on.
As indicated in , you can administer the system parameter ENHDIALSTAT to turn off the
Enhanced Local Dialing feature.
Example: A corporate voice network has a 4-digit dialing plan. The corporate WML Web site lists a
4-digit number as a link on the Human Resources page. A 9621G user taps to select that link. The
9621G deduces the number is a part of the corporate network because the extension matches a dial
plan element. The deskphone then dials the number without further processing.

Setting the dial plan on SIP deskphones

Note:
This section only applies to operations with a secondary controller where Communication
Manager or Session Manager is not available. In a failover situation, the dial plan is played
locally even if a proxy connection is not available. The user might hear a dial tone but cannot
make a call.
During manual dialing, a dial plan allows a call to be initiated without using a Send button and
without waiting for the expiration of a timeout interval. The dial plan consists of one or more format
strings. When the dialed digits match a format string in the DIALPLAN configuration parameter, the
call is initiated.
Valid characters in a format string, and their meanings, are as follows:
• digits 0 through 9, inclusive = Specific dialpad digits
• * = the dialpad character *
• # = the dialpad character # (but only if it is the first character in the dialed string – see below)
• x = any dialpad digit (i.e., 0-9)
• Z or z = present dial tone to the user (for example, for Feature Access Code (FAC) entry)
• [ ] = any one character within the brackets is a valid match for a dial plan string
• - = any one digit between the bounds within the brackets, inclusive, is a match
• + = the character following the + can repeat 0 or more additional times, for a valid match
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
Comments on this document? infodev@avaya.com
Setting the dial plan on SIP deskphones
95