Deskphone Interface Settings Parameters - Avaya 9601 Administering

Configuration through the settings file
Parameter
NO_DIGITS_TIMEOUT
INTER_DIGIT_TIMEOUT
FAILED_SESSION_REMOVA
L_TIMER
FAST_RESPONSE_TIMEOUT Integer
RECOVERYREGISTERWAIT
FAILBACK_POLICY
WAIT_FOR_INVITE_RESPON
SE_TIMEOUT

Deskphone interface settings parameters

Common operation
Parameter
BAKLIGHTOFF
RINGTONESTYLE
Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
54
Type Default Description
value
Integer 20 Specifies the duration for timeout when no digit is
entered. The range is from 1 to 60.
Integer 5 Specifies the duration for timeout between entered
digits. The range is from 1 to 10.
Integer 30 Specifies the timer to remove failed call session. The
range is from 5 to 999.
4 Specifies the fast response timer. The range is from
0 to 32.
Integer 60 Specifies the interval for reactive monitoring. The
range is from 10 to 36000.
String auto Specifies the fail back policy. Assign one of the
following values:
• admin
• auto
Integer 60 Specifies the maximum duration in seconds that the
phone waits to get a response after receiving 100
trying. The range is 30 to 180 seconds.
Type Default Description
value
Integer 120 Specifies the idle time in minutes after which the
device turns off the backlight. The range is from 0 to
999.
Integer 0 Specifies the style of classic ringtone that the device
offers. Assign one of the following values:
• 0: For North American ringtones.
• 1: For European ringtones.
Comments on this document? infodev@avaya.com
Note:
The parameter is only applicable for the
registered devices that are currently logged-in.
Table continues...
August 2015