Avaya 9601 Administering page 36

Configuration through the settings file
Parameter
HTTPPROXY
HTTPEXCEPTIONDOMAINS
TLSDIR
HTTPPORT
TLSPORT
CONFIG_SERVER
SIP_CONTROLLER_LIST
Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
36
Type Default Description
value
String Null Specifies a list of IP or DNS addresses of HTTP
proxy servers. If this parameter is not null, the proxy
transport address assigned in this parameter is used
to set up the HTTP connection as transport protocol
for SCEP, browser, and Exchange account.
This parameter is not a URL and must not begin with
the text http://., for example, ca.avaya.com:8000.
String Null Specifies the domains to be excluded for use of
HTTP proxy server. An HTTP connection as
transport layer for SCEP is only set up through the
parameter HTTPPROXY, if the right-most part of the
domain portion of the MYCERTURL does not match
to one of the values in this parameter.
A HTTP connection as transport layer for the Andorid
browser and Exchange account is only set up
through the parameter HTTPPROXY, if the right-
most part of the domain portion of the Exchange
server name and web page name does not match to
one of the values in this parameter.
String Null Specifies the path name for HTTPS downloads. The
range is from 0 to 127 characters.
Numeric 80 Specifies the destination port for HTTP requests.
The range is from 0 to 65535.
Numeric 443 Specifos the destination port for HTTPS requests.
The range is from 0 to 65535.
String Null Specifies the address of the configuration server. If
the environment it set up such that the PPM server is
at a different location than the HTTP proxy server
address, the device uses the configuration server
address instead. The device will not use the proxy
server for PPM.
String Null Specifies a comma separated list of IP addresses of
SIP proxy or registrar server. The range is from 0 to
255.
The list has the following format.
host[:port][;transport=xxx], where:
• host is an IP address in dotted-decimal format
• port is the optional port number. If you do not
Comments on this document? infodev@avaya.com
specify a port number, the system uses the
following default values:
- 5060 for UDP and TCP
Table continues...
August 2015