Avaya 9601 Administering page 44

Configuration through the settings file
Parameter
MYCERTDN
MYCERTKEYLEN
MYCERTRENEW
MYCERTWAIT
MYCERTCAID
SCEPPASSWORD
Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP
44
Type Default Description
value
If the value includes the string "$MACADDR", that
string will be replaced by the phones MAC address.
String Null Specifies common part of SUBJECT in SCEP
certificate request. This value defines the part of
SUBJECT in a certificate request including
Organizational Unit, Organization, Location, State,
and Country that is common for requests from
different devices.
Integer 1024 Specifies the private key length in bits to be created
in the device for a certificate enrollment. The range is
from 1024 to 2048.
Integer 90 Specifies the percentage used to calculate the
renewal time interval out of the device certificate's
Validity Object. If the renewal time interval has
elapsed the phone starts to periodically contact the
SCEP server again to renew the certificate. The
range is from 1 to 99.
Integer 1 Specifies the behavior of the device when performing
certificate enrolment. assign one of the following
values:
• 0: Periodical check in the background.
• 1: Wait until a certificate or a denial is received or a
String CAIdenti Specifies the Certificate Authority Identifier.
fier Certificate Authority servers may require a specific
CA Identifier string in order to accept GetCA
requests. If the device works with such a Certificate
Authority, the CA identifier string can be set through
this parameter.
String $SERIA Specifies a challenge password to use with SCEP.
LNO The value of SCEPPASSWORD, if non-null, is
included in a challengePassword attribute in SCEP
certificate signing requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO,. If the value
contains $MACADDR, $MACADDR is replaced by
the value of MACADDR without the colon
separators.
Comments on this document? infodev@avaya.com
pending notification is received.
August 2015