Correcting Ink Output Position: Bidirectional Adjustment - Oki IP-5630 User Manual

Correcting ink output position: Bidirectional adjustment

During bidirectional printing, a slight difference may appear in the ink output position between the first scanning
direction and the second scanning direction.
To maintain a high print quality, perform bidirectional adjustment and set the most suitable bidirectional
adjustment value.
What is the timing to perform bidirectional adjustment?
š When one of the following changes has been made
- The media has been changed
- The print mode has been changed
- The carriage speed (normal, slow) has been changed
- The height of the print heads has been changed
š When the bidirectional adjustment value is incorrect.
When the bidirectional adjustment value is incorrect, grains may appear on the printout or the printout may be
blurred.
Automatic print adjustment
See Cautions regarding automatic print adjustment (
<Workflow>
Execute automatic print adjustment
<Procedure>
1
2
PRINTER READY
01: PAPER / 1626mm
3
ADJUST
2
MEDIA ADVANCE
4
ADJUST
2 BIDIR POSITION
80
Adjustment
i
Perform manual print adjustment (
,
page 73)
Completed
If the print quality has not
been improved
page 82)
Load the media
Load the media in the same conditions as normal printing.
Press the ADJUST button.
Press the Up and Down buttons to select
BIDIR POSITION.
Press the OK button.