GE Moisture monitor series 3 Programming Manual page 62

March 2008
Setting Error Processing
(cont.)
3-34
If you selected one of the RECORDERS:
Sel. ERR RCD Resp
IGNORE [HIGH]
To continue setting error processing, refer back to the "Selecting
Error Response" step.
You may now do one of the following:
•
Set error processing for the other channel by pressing
you return to the Programming Menu (as shown on page 3-32).
•
Refer to another section and perform a different procedure. Refer
to Figure 3-2 on page 3-48 and Figure 3-3 on page 3-49 to navigate
through the user program.
•
[RUN]
Exit by pressing the
1 Use the arrow keys to select how
the recorder will respond to a
range error (ignore, go high, or
go low) and press
key.
Advanced Programming
[YES].
[NO]
until