GE Moisture monitor series 3 Programming Manual page 53

Table 3-6: Print-Out Symbols and Abbreviations (cont.)
Number
Mode/Unit Format
Auxiliary Inputs
X1/VDC ±X.XXXX
X1/mA ±XX.XXX
X1/ ±XX.XXXX
X2/VDC ±X.XXXX
X2/mA ±XX.XXX
X2/ ±XX.XXXX
Other
VR/VDC ±X.XXXX
GD/VDC ±X.XXXX
Advanced Programming
Measurement Mode
Auxiliary input #1 in volts.
Auxiliary input #1 in milliamperes.
Auxiliary input #1 in user-defined units.
Auxiliary input #2 in volts.
Auxiliary input #2 in milliamperes.
Auxiliary input #2 in user-defined units.
Channel card reference voltage.
Channel card ground voltage.
Note: In the formats presented above, the plus/minus (±) symbol
indicates that the data is signed and will be preceded by a plus
(+) or minus (–) sign. The number of decimal places indicated
is for nominal values. The instrument will maintain the
number of digits by "floating" the decimal point to the right
as the magnitude of the number increases. DO NOT "hard-
code" the decimal points when using data acquisition
software.
March 2008
3-25