Entering Moisture Curve Data - GE Moisture monitor series 3 Programming Manual

Entering Moisture Curve
Data
Advanced Programming
MH Curve Menu
[S/N] #PTS CURVE
Probe Serial #
H: 123456
MH Curve Menu
S/N [#PTS] CURVE
Enter Total #PTS
14
MH Curve Menu
S/N #PTS [CURVE]
If you refer to your Calibration Data Sheet you will notice that the
data points begin numbering at 0 (zero); therefore, the MMS-3
displays the selected number of data points you entered (Step 4)
minus 1.
# DP/°C MH
12 +0.0 0.0000
1
Use the arrow keys to move the
brackets to S/N and press
1 Enter the serial number and press
[YES]
. The probe serial number is
engraved on the probe mount.
[NO]
Then press to return to the
Curve menu.
1 Use the arrow keys to move the
brackets to #PTS and press
1
Enter the total number of data
points (1 to 16) and press
Refer to the Calibration Data
Sheet for the number of data
[NO]
points.Then press
to the Curve menu.
1 Use the arrow keys to move the
brackets to CURVE and press
[YES].
1 If you want to begin entering
data at the data point displayed,
press the right arrow key to
move the bracket to DP/°C.
Otherwise, enter the desired data
point number. Press
press the right arrow key.
March 2008
[YES].
[YES].
[YES].
to return
[YES]
and
3-41