Using This Manual; Using Flowcharts - Sam4s ER-230EJ Operating And Programming Manual

Using This Manual

This manual provides you with a means to use your SAM4S cash register to its fullest
potential. It is divided into seven sections:
1. "Getting Started" on page 23 provides quick start steps to help you get up and running
for basic applications.
2. "Operations" on page 25 guides you through basic operation sequences.
3. "Manager Mode (X Mode)" on page 61 explains manager controlled functions, along
with X reports and balancing information.
4. "Z Mode" on page 71 explains how to reset register reports as well as other functions
performed in this mode: mix & match discounts, PLU lookups and DataTran
operations.
5. "Service Mode " on page 75 provides instructions for secure programming – usually
done by the installing dealer prior to installation.
6. "Program Mode " on page 101 provides complete programming instructions, including
PLU, function key programs, and options. This section is recommended for use by
storeowners and managers. Call your SAM4S dealer if you find you need
programming assistance.
7. "Sample Reports" on page 157 provides a sample of each register report.
The SAM4S ER-230EJ allows many different user applications. This manual was written
with this in mind. Although we have tried to touch on all available options, your specific
application may differ.
If you have questions concerning the configuration of your ER-230EJ, please contact your
authorized SAM4S dealer.

Using Flowcharts

Flowcharts are used to supplement step-by-step instructions throughout this manual. For
example, the following flowchart describes how to register £1.00 into the PLU1 key:
This flowchart means:
Press numeric key 1.
Press numeric key 0.
Press numeric key 0.
Press PLU #1.
Follow the flowchart from left to right, pressing the keys in the order they are shown.
Numeric keypad entries are shown as square keys. PLU and function keys are shown as
rectangular keys.
12 • Introduction
1 0 0
1
SAM4S ER-230EJ Manual