Sam4s ER-230EJ Operating And Programming Manual page 140

Option
PRINT ON FIN RPT
AVG £/CUST
PRINT CLERK REPORT
AFTER FINANCIAL
REPORT
PRINT DOUBLE
FINANCIAL REPORT
PRINT GROSS TOTAL
ON X REPORT
PRINT GROSS TOTAL
ON Z REPORT
PRINT GRAND TOTAL
ON X REPORT
PRINT GRAND TOTAL
ON Z REPORT
GRAND TOTAL IS
SKIP ZERO TOTALS
ON CLERK REPORT
PRINT MEDIA TOTALS
ON CLERK REPORT
SKIP ZERO TOTALS
ON PLU REPORT
PRINT PLU #
ON PLU REPORT
PRINT % OF SALES ON
PLU REPORT
PRT PLU BY PRICE
LEVEL REPORT
ALLOW Z STOCK
REPORT
PRINT WHEN
POLLING REPORTS
140 • Program Mode
Entry Description
Y or N
Select Y to print the average sales per customer (Net
Sales/Net Sales counter).
Y or N Select Y if you wish to include the clerk report
information at the end of the financial report.
Y or N Select Y if you wish to print 2 copy financial reports.
Y or N Select N if you wish to delete the printing of the
gross sales total on the X financial report.
Y or N
Select N if you wish to delete the printing of the
gross sales total on the Z financial report.
Y or N Select N if you wish to delete the printing of the
grand total on the X financial report.
Y or N
Select N if you wish to delete the printing of the
grand total on the Z financial report.
GROSS Choose GROSS if you wish the grand total to
accumulate daily gross sales totals. Choose NET if
NET
you wish the grand total to accumulate daily net sales
totals.
Y or N By default, the register prints only totals with
information other than zero. Select N, if you wish to
print the contents of all the clerk report totals, even if
the total is zero.
Y or N
Select Y to print media totals for each clerk, thus
allowing clerk cash drawer accountability.
Y or N By default, the register prints only totals with
information other than zero. Select Y, if you wish to
print the contents of the entire PLUs, even if the total
is zero.
Y or N Determines whether PLU# is displayed on the report.
Y or N The register can calculate the percentage of sales
represented by each PLU. Select Y if you wish to
print this percentage on the PLU report. Note: the
percentage will print only on standalone register
reports, not IRC report.
Y or N
Select Y if you wish to print PLU by price level on
PLU reports.
Y or N When N, the operator is not allowed to clear (Z)
stock.
Y or N Choose N if you would like to suppress register
printing when reports are polled.
SAM4S ER-230EJ Manual