Usb Operation - Sam4s ER-230EJ Operating And Programming Manual

USB Operation

Utilities in this program include:
Read Carefully: Store Name Notes
The store name you set on "Store name" page 133 is used to identify program and report
data on the USB memory. Note that the default store name is "STORE001".
If you are using the USB memory to move information to a PC or use the program or report
data with the PC Utility, you must pay close attention to the store name. Do not use
characters such as "-" or "/" that cannot be used in naming a folder on your PC. If you use
such a character in your store name, you will not be able to read the files on your PC.
The Store Name field is 8-characters in length.
Note: If you are Using an USB memory for the First Time . . .
NOTE: USB memory must be formatted as FAT 32.
CAUTION: Formatting the USB memory will clear all data on the USB memory and
prepare it for use.
See page on 86 for detail.
96 • Service Mode

Program Backup & Restore

Report Save

Pre-Image Logo Loading & Save

Post-Image Logo Loading & Save
1. At the SERVICE MODE, press 7 and CASH for Program Backup Operation.
2. Press 2 and CASH for SD operation. he USB screen displays:
SD
1. PGM BACKUP
SD
1. PGM BACKUP
2. PGM RESTORE
3. REPORT SAVE
4. IMAGE SAVE
5. IMAGE LOAD
3. Insert the USB memory in the register's USB slot.
4. Enter the digit (1-5) corresponding to the function you wish to access. A
complete explanation of each function follows.
SAM4S ER-230EJ Manual