Sam4s ER-230EJ Operating And Programming Manual page 95

Program Area Update
SAM4S ER-230EJ Manual
8. Select Boot Area Only in the Select One option buttons.
9. Press OK Button. The download takes about 30 seconds; the scroll bar
will track the progress of the download. At the ECR, the display will flash
slowly while the update is taking place.
10. When complete, the message Completed displays on the PC. Click OK
and the Download program will close. At the ECR, the display will change
to a blue color indicating the update is complete. Turn the power switch to
the OFF.
1. Connect the Serial Cable From ECR to PC.
2. At the register, move to the SERVICE MODE.
3. Turn the power switch to the OFF position.
4. Press the upper right key and the lower right key. A rapid beep-beep-beep
sound will be heard. Release the upper right key and the lower right key.
5. Press the ↑ key and the ↓ key to select menu and press the CASH key
to confirm. Select the 1.SERIAL1 menu.
6. At the PC, execute the program "Download.exe". The Download dialog
box displays.
7. Select the appropriate com port connection at your PC at the PORT#
option buttons.
8. Click find the folder where the update files are located and select
binary file.
9. Select Program code + Font in the Select One option buttons.
10. Press OK Button. The download takes about 3 minutes. At the PC, the
scroll bar will track the progress of the download. At the ECR, The display
will flash (Current program is being erased), after a few seconds, the
display will continue to flash, but at a slower rate. This continues for about
3 minutes while the new program is being loaded.
11. When complete, the message Completed displays at thePC. Click OK and
the Download program will close. At the ECR, when the load is complete,
a rapid beep-beep-beep will be heard, and the display will flash rapidly.
Turn the power switch to OFF, the program update is complete.
12. Disconnect the PC cable.
13. Perform a memory all clear on the ECR. The ECR is now ready to
program or to load a previously saved end-user program.
Service Mode • 95