Sam4s ER-230EJ Operating And Programming Manual page 136

Option
USE X/Z/P/S MODE
PASSWORD
PRINTER PAPER
SENSOR ACTIVE
RS-232C PORT
POWER ON
SLEEP MODE TIME
SET(SECONDS)
STORE NAME
DRAWER LIMIT
CHECK CHANGE
LIMIT
MACHINE NO.
MODE P/W
136 • Program Mode
Entry Description
Y or N
Select Y to be password protected to provide
management restriction in X, Z, PROGRAM(P)
and SERVICE(S) MODE.
Y or N A built in paper sensor determines whether paper is
currently loaded in the printer. If Y, operations are
not allowed without paper loaded. If N, operations
are allowed when paper is out.
Y or N
Select Y to turn ON the serial port power.
0-240 0: Do not use sleep mode.
1~240: If want to use sleep mode, Please input to
this option value for seconds of sleep mode.
(BATTERY model only)
8 Character Stored files will be saved on SD/USB under a
folder with the store name. Do not include spaces
between the names.
8 DIGIT You can set a limit for the drawer total. When cash
in drawer exceeds the limit you program here, a
warning will display on the screen. You must press
CLEAR to remove the warning and continue
operations. The warning will continue to appear at
the completion of every transaction with the limit
exceeded, until you use the PAID OUT function to
remove cash from the drawer.
Set the drawer limit to 0 to disable the drawer limit
warning.
8 DIGIT Use this program to set the maximum amount of
cash that can be returned when a check is tendered
for an amount greater than the amount of the sale.
For example, if the check change limit is £10.00
the maximum amount that can be tendered into the
check key on a £5.00 sale is £15.00.
5 DIGIT The machine number is printed on the register
receipt. Program a machine number so that any
receipt can be identified with the store or register
where the transaction took place.
6 DIGIT If you wish to use mode password, you must
program a password that you will use to enter X
mode, Z mode, PROGRAM(P) mode and
SERVICE(S) mode. The password may be up to 6
digits.
SAM4S ER-230EJ Manual