Program Backup And Load - Sam4s ER-230EJ Operating And Programming Manual

Program Backup and Load

You can use an USB flash memory card to backup and load (restore) the full program.
NOTE: The program data is saved in a separate folder on the USB memory named
with the store. Note that the default store name is "STORE001". See page 133 for
more information about the store name.
Backing Up the Program to an USB memory
SAM4S ER-230EJ Manual
1. Insert the USB memory in the register's USB port.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP" .
4. From the PROGRAM BACKUP menu, select "2.USB".
5. From the USB menu, select "1.PGM BACKUP".

The ER-230EJ will write the program files to the folder:
ER-230EJ\STORENAME\PGMBACK

In the example below, the store name is "SAM4S".
6. After a short pause, the register will display confirmation of the successful
backup with the message "SUCCESS !". Below is an Explorer view of the
backed up files.
Service Mode • 97