Using This Manual; Using Flowcharts - Sam4s ER-900 Series Operation And Program Manual

Using This Manual

This manual provides you with a means to use your SAM4s cash register to its fullest potential. It is
divided into seven sections:
•
Introduction - the section you are reading now; provides a basic idea about the register and
how to use this manual.
•
Getting Started - provides quick start steps to help you get up and running for basic
applications.
•
Operations - guides you through the basic operation sequences.
•
Management Functions X/Z-Mode - explains manager controlled functions, along with
reports and balancing information.
•
S-Mode Programming - provides instructions for secure programming – usually done by
the installing dealer prior to installation.
•
P-Mode Programming - provides complete programming instructions, including PLU,
function key programs, and system options. This section is recommended for use by
storeowners and managers. Call your SAM4s dealer if you find you need programming
assistance.
•
Sample Reports - provides a sample of each register report.
These SAM4s Cash Registers allows many different user applications. This manual was written with
this in mind. Although we have tried to touch on all available options, your specific application may
differ.
If you have questions concerning the configuration of your Sam4S Cash Register, contact your
authorized SAM4s dealer.

Using Flowcharts

Flowcharts are used to supplement step-by-step instructions throughout this manual. For example,
the following flowchart describes how to register $1.00 into the PLU1 key:
1
This flowchart means:
1. Press numeric key 1.
2. Press numeric key 0.
3. Press numeric key 0.
4. Press PLU #1.
Follow the flowchart from left to right, pressing the keys in the order they are shown. Numeric
keypad entries are shown as square keys. PLU and function keys are shown as rectangular keys.
2 • Introduction
0 0 PLU #1
SAM4S ER-900 Series Electronic Cash Register AU