Using This Manual; Unpacking - Sam4s ER-655II Operation Manual

Using this Manual

This manual provides the sequences and reference information required to set up and operate
your SAM4s ER-655II.
In this Manual you will find:

Unpacking

2  Getting Started

"Getting Started" - Before you begin, please review the information in this
chapter carefully, including:
 unpacking and initial setup
 the basic features and capabilities of your ER-655II

"Operating Instructions" - Step by step operating sequences for your ER-655II.

"X Mode" - Manager procedures, including X reports are detailed here.

"Z Mode" - Z (reset) reports are detailed.

"Service Mode Programming" - In the service mode, you can perform hardware
tests, then complete one-time set up procedures that will ready your ER-655II for
use.

"Program Mode Programming" - All routine programming procedures, including
PLU, function key, system options and sales tax programming are performed in
Program Mode.

"Sample Reports" - A sample of each report is provided.
1. Unpack and Unwrap the cash register.
2. Located in the packing are the following items:

1 roll of paper and paper spindle,

2 sets of control keys,

Operation and Program Manual,

3 Keyboard legend sheets: 1 blank, 1 blank with numerals, 1-alpha numeric,

1 ferrite core for use with optional IRC cable. (See instructions included
with IRC cable.)
3. Remove the cardboard protectors from the cash drawer.
4. Plug the register into a grounded outlet (three prong), insert a control key and
turn the key to the REG control lock position.
SAM4s ER-655II v1.2