Danfoss VLT AutomationDrive FC 300 Instruction Manual page 22

3 How to Install
Frame IP20
A1
A2
A3
A4/A5
B1
B2
B3
B4
C1
3
C2
C3
C4
* = No screws to tighten
- = Does not exist
3.2.2 Panel Through Mounting
A Panel Through Mount Kit is available for adjustable frequency drive series VLT HVAC FC 102, VLT Aqua Drive and VLT AutomationDrive.
In order to increase heatsink cooling and reduce panel depth, the adjustable frequency drive may be mounted in a through panel. Furthermore, the built-
in fan can then be removed.
The kit is available for enclosures A5 through C2.
NOTE!
This kit cannot be used with cast front covers. IP21 plastic cover must be used instead.
Information on ordering numbers is found in the
More detailed information is available in the
3-6
Tightening torque for covers (Nm)
IP21 IP55
* - -
* * -
* * -
- - 2
- * 2.2
- * 2.2
* - -
2 - -
- * 2.2
- * 2.2
2 - -
2 - -
Design Guide
, section
Panel Through Mount Kit instruction, MI.33.HX.YY,
MG.33.AG.22 - VLT
VLT ®
IP66
-
-
-
2
2.2
2.2
-
-
2.2
2.2
-
-
Ordering Numbers.
where yy=language code.
®
is a registered Danfoss trademark
AutomationDrive FC 300 Instruction
Manual