Resetting Nvdata; Viewing Nvdata - 3Com corebuilder 3500 Implementation Manual

Hide thumbs Also See for corebuilder 3500:

Table of Contents

Resetting nvData

To reset the system settings back to their factory default values, use the

nvData reset option.

Important Considerations

Consider these points before you reset nvData on your system:

Resetting nvData erases all user-configured data, including all

passwords, except the terminalSpeed and modemSpeed baud settings

and the system boot parameters. Therefore, before you reset all

affected values, document your configuration so that you can

reconfigure the system after you reset it, or save the existing nvData to

a file. See "Saving nvData" earlier in this chapter for details.

You can reset nvData on a system only when it is directly connected

through the Administration Console. You cannot reset nvData

through a Telnet connection.

To verify that you have successfully saved nvData to the file that you

specified, view the header information for that file. The header

information shows pertinent product and system information.

Select menu option: system nvdata examine

Host IP Address [158.101.100.1]: 158.101.112.34

NV Control file (full pathname): systemdata

Product ID 4, Product Type 1

System ID 102D00

Saved 1999-05-20T09:24:43 AM Version 2.

Labelled: LabSwitch

nvData Operations