3Com corebuilder 3500 Implementation Manual page 305

RIP Export Policy Conditions for Specified Interfaces
Table 43 lists the policy conditions for the RIP export policies.
Table 43 RIP Export Policy Conditions
Source
Protocol Router
RIP, OSPF, Specified
static router or
all routers
RIP, OSPF, Specified
static router or
all routers
RIP, OSPF, Specified
static router or
all routers
RIP, OSPF, Specified
static routers or
all routers
Multiple Matched Routing Policies
Because you can use a wildcard parameter (
target route, there are times when several policies can apply to the same
route.
When the system perceives that there is more than one policy for the
same route, it follows this hierarchy of rules to resolve the policy conflict:
The policy with the highest administrative weight
The policy that matches the specific source
The policy that matches the most number of bits for the route
The policy that matches the origin protocol
The policy with the lowest index
Route Action
Specified accept
route/mask
all (0.0.0.0) accept
Specified reject
route/mask
all reject
Routing Policies
Description
Advertise RIP/OSPF/static
specified route from
specified source router on
specified interfaces with
or without metric
adjustments (+, -, *, /, %).
Advertise all
RIP/OSPF/static routes
from specified router on
specified interfaces with
or without metric
adjustments (+, -, *, /, %).
Do not advertise the
RIP/OSPF/static specified
route on specified
interfaces.
Do not advertise all
RIP/OSPF/static routes on
specified interfaces.
) to specify a source or
all
305