Setting Rsvp Parameters - 3Com corebuilder 3500 Implementation Manual

520 C 17: Q S
HAPTER O
Setting RSVP
Parameters
RSVP
AND
If you enable RSVP, you specify the following information:
The maximum total reservable bandwidth
The maximum per-reservation bandwidth
The policing option (edge, always, or never, with edge as the default)
The service level for excess/policed traffic (best or low, with low as the
default). This setting applies to the excess traffic with the reserved
bandwidth (that is, in which queue it should be placed).
Whether nonconforming excess are loss eligible (yes or no, with no as
the default)
After you enable RSVP, you can use your management interface (for
example, the Administration Console) to display summary or detail
information about RSVP.