3Com corebuilder 3500 Implementation Manual page 173

Hide thumbs Also See for corebuilder 3500:

Table of Contents

Ignore STP Mode

Figure 27 shows two paths available if a workstation associated with

Example of Ignore

IP VLAN E wants to communicate with a server associated with IP

VLAN D. STP blocks the routed as well as bridged traffic for the one path

unless you enable Ignore STP Mode for the routed IP VLANs. With the

blocking removed for IP routed traffic, the best path is used.

Figure 27 Using Ignore STP Mode

Ignore STP Mode

Enabled for ports

Need help?

Do you have a question about the corebuilder 3500 and is the answer not in the manual?