Zone Information Protocol - 3Com corebuilder 3500 Implementation Manual

472 C 16: A
HAPTER PPLE
Zone Information
Protocol
T
ALK
routeEqChgs — Number of times that RTMP changed the Next
Internet Router in a routing entry because the hop count advertised in
a routing table was equal to the current hop count for a particular
network
routeLessChgs — Number of times that RTMP changed the Next
Internet Router in a routing entry because the hop count advertised in
a routing table was less than the current hop count for a particular
network
routeOverflows — Number of times that RTMP attempted to add a
route to the RTMP table but failed because of lack of space
AppleTalk uses the Zone Information Protocol (ZIP) to maintain a mapping
between networks and zone names. This network-to-zone mapping is
used to facilitate the name-lookup process performed by the Name
Binding Protocol. Your system allows you to view a variety of ZIP statistics,
including:
inErrors — Number of ZIP packets received that were rejected for any
error
inExReplies — Number of ZIP extended replies received
inGniReplies — Number of ZIP GetNetInfo reply packets received
inGniRequests — Number of ZIP GetNetInfo request packets
received
inLocalZones — Number of Zip GetLocalZones requests packets
received
inObsoletes — Number of ZIP Takedown or ZIP Bringup packets
received
inQueries — Number of ZIP queries received
inReplies — Number of ZIP replies received
inZoneCons — Number of times that a conflict has been detected
between this system's zone information and another entity's zone
information
inZoneInvs — Number of times that this system has received a ZIP
GetNetInfo reply with the zone invalid bit set because the
corresponding GetNetInfo request had an invalid zone name
inZoneLists — Number of Zip GetZoneLists requests packets received