Changing Parameter Settings Using Ams Device Manager; Configure/Setup (Level Transducer Block-Ltb); Identification (Ltb) - Siemens SITRANS L Operating Instructions Manual

Remote operation
7.1 Operating via AMS Device Manager
Step 5 - Summary
Click on Step 5 - Summary in the navigation window. Check parameter settings. Return to
individual steps if further changes are necessary.
The Quick Start Wizard is now complete.
7.1.8

Changing parameter settings using AMS Device Manager

Note
• For a complete list of parameters, see Parameter Reference (Page 120).
• For more detailed explanations of the parameters listed below see the pages referenced.
1. Adjust parameter values in the parameter value field in Configure/Setup view, then click on
Apply to write the new values to the device. The parameter field will display in yellow until
the value has been written to the device.
2. Click on OK only if you wish to update all parameters and exit device view.
7.1.9

Configure/Setup (Level Transducer Block-LTB)

7.1.9.1

Identification (LTB)

Navigate to Configure/Setup > LTB > Identification.
74
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH