Delete And Reset Factory Settings - Fractal Audio MFC-101 Owner's Manual

Fractal Audio Systems MFC-101 Manual

12.5.26 Delete and Reset Factory Settings

EDIT : SETUP : PAGE
(26x)
Delete is used to Reset all or some of the MFC-101 to factory settings.
WARNING: Deleting MFC-101 user data is DESTRUCTIVE and cannot be undone!
It is strongly recommended that you BACK UP user data prior to using this function.
Delete PRESET 001
INCR/DECR
Use the footswitches to select a general target for initialization.
PARAMETER
In some cases,
The parameter values for each field are detailed below:
Setting Notes
nd
PRESET 2 parameter selects an individual Preset, 000-127, or ALL
nd
SONG 2 parameter selects an individual Song, 000-100, or ALL
nd
SET 2 parameter selects an individual Set, 00-10, or ALL
nd
IA SWITCH 2 parameter selects an individual IA Switch, 00-43, or ALL
nd
INT CC 2 parameter selects an individual Internal CC, 00-17, or ALL
AXE PC Resets the entire Axe-Fx Preset Tx Map (12.4.3)
PRESET MAP Resets the entire MFC-101 Incoming Program Change Map (12.4.6)
CONFIGURATION Resets General Configuration, MIDI Configuration, and External Devices Configuration to their
default values as listed on in 15.1: Factory Default Settings, on page 79
MFC-101 Resets the entire MFC-101 to factory default settings as listed in 15.1: Factory Default Settings, on
page 79
ENTER
Press the flashing footswitch to delete the selected item and initialize with factory defaults.
NOTE: Due to increased CPU activity during deletion, it is normal for LED blinking to slow or even stop.
NOTE: The preset will re-load automatically when returning to PERFORMANCE MODE after most deletions.
Doc v2.15
nd
 moves to a 2
parameter for selection of a specific target for initialization.
SETUP MENU REFERENCE
PAGE
or 
(3x)
69