Copy Functions - Fractal Audio MFC-101 Owner's Manual

SONGS & SETS

10 COPY FUNCTIONS

With the likelihood of many entries in your rig being based off of similar templates, the capability to copy settings
from one MFC-101 item to another can be a timesaver.
Using the COPY menu, the following types of items can be copied from one memory location to another:
 Presets – Use this to easily transfer the name and all MIDI commands from one preset to another, but
remember that the settings of any Preset do not determine which Axe-Fx program it will recall. See
Presets and Program Changes on p. 16 for more information.
 Songs – Use this to copy the Song name and all of the Song Presets.
 Sets – Use this to copy the Set name and all of the songs in it.
 Instant Access Switch Settings – Use this to copy the IA Switch name and all settings, including any
assigned Axe-Fx mode function.
 Internal CCs – Use this to copy the name and settings for the Internal CC.
To demonstrate how to execute a COPY operation, we'll use the example of Copy IA Switch:
1. Press EDIT footswitch to enter EDIT MODE.
2. Press COPY footswitch to select the COPY menu.
3. Press PAGE 4x to arrive at the Copy IA Switch screen:
Copy IASw 01 to 01
4. Press and/or hold the INCR or DECR footswitches to select the Source.
5. Press PARAMETER to move to the Destination field.
Press and/or hold the INCR or DECR footswitches to select the Destination.
NOTE: The Destination must not be the same as the Source.
(The ENTER LED will flash to indicate a valid Copy selection).
6. Press the ENTER footswitch to execute the Copy.
7. Press EXIT to return to PERFORMANCE MODE.
All of the copy operations are covered in section 12.3, beginning on p. 49
Fractal Audio Systems MFC-101 Manual