Send Ia Switch Link Off Messages; Internal Cc Names; External Switch Hardware Type - Fractal Audio MFC-101 Owner's Manual

Fractal Audio Systems MFC-101 Manual

12.5.15 Send IA Switch Link OFF Messages

EDIT : SETUP : PAGE
(15x)
Send IA Switch Link OFF Messages determines whether the OFF state MIDI commands for linked IA Switches (see 12.5.14
above) are sent or not sent automatically when another linked switch in the same group is turned ON (thereby turning the
switch in question OFF automatically). Even if automatic sending is disabled, OFF messages may still be sent by stepping again
on a switch that is turned ON.
SendSwLinkOffMsg YES

12.5.16 Internal CC Names

EDIT : SETUP : PAGE
(16x)
Internal Control Change Name is used to set "friendly" names for Internal CCs.
IntCc01 Name IntCc 01
PARAMETER
The   footswitches step between the Internal CC number parameter and move through the individual
characters of the Internal CC Name parameter.
The name of a selected Internal CC appears briefly as a memory aid when the
in any "IntCc" selection parameter on any MFC-101 menu page.

12.5.17 External Switch Hardware Type

EDIT : SETUP : PAGE
(17x)
External Switch Hardware Type is used to set up the MFC-101 according to the physical type of up to four optional External
Switches—whether MOMENTARY (aka "hold") or TOGGLE (aka "latching")—which may be connected at its 2 External Switch
jacks.
XS1 Type MOMENTARY
PARAMETER
The   switches select between External Switch Number and External Switch HW Type parameters.
Doc v2.15
SETUP MENU REFERENCE
NAMES
footswitch is pressed while the cursor is
PAGE
or 
(14x)
PAGE
or 
(13x)
PAGE
or 
(12x)
65