Footswitch Secondary Functions; Figure 1-3: Layout Of An Mfc-101 Footswitch - Fractal Audio MFC-101 Owner's Manual

Fractal Audio Systems MFC-101 Manual

1.2.2 Footswitch Secondary Functions

The footswitches perform their secondary functions when the MFC-101 is in EDIT MODE:
 After EDIT is pressed once, footswitches 1–5 are used to enter the 5 main menus:
PRESET, SONG/SET, COPY, MIDI, and SETUP.
 The two PAGE footswitches (6 & 7) step back and forth through the pages of the current menu.
 The two PARAMETER footswitches (11 & 12) select editable parameters on the current page.
 The (INCRement and DECRement footswitches (UP and DOWN) change the value of the currently
selected parameter.
You can hold any of the above to scroll quickly through the list of pages/parameters/values.
 ENTER (footswitch 14) is used to execute various functions. Examples include Factory Restore or
Dump to SysEx. The LED above this footswitch flashes red when ENTER can be used to perform some
action, and to remind you that this will be committed to memory immediately with no turning back.
 EXIT is the secondary function of the EDIT footswitch. Pressing this footswitch while in in EDIT MODE
will save all changes and return the MFC-101 to PERFORMANCE MODE.
 NAMES (footswitch 9) makes it easier to customize your MFC-101 for easy operation. It allows you to
view the short NAMES you may assign to various items throughout the the memory of the MFC-101. A
MIDI Channel, for example, might be named "Gizmo" or an Instant Access Switch might be named
"Extern 8". See Chapter 11 for details on how to enter names.
Doc v2.15

Figure 1-3: Layout of an MFC-101 Footswitch

OVERVIEW
3