Figure 2-2: Connecting The Mfc-101 To An Axe-Fx With Phantom Power; Figure 2-3: Connecting The Mfc-101 To An Axe-Fx Without Phantom Power - Fractal Audio MFC-101 Owner's Manual

GETTING CONNECTED
The next scenarios show connections over 7 or 5 pin MIDI cables:

Figure 2-2: Connecting the MFC-101 to an Axe-Fx with Phantom Power

2-way MIDI data communication and phantom power are provided via a single 7-conductor MIDI cable.
The Axe-Fx Standard, Ultra, or Axe-Fx II may be connected in this way.

Figure 2-3: Connecting the MFC-101 to an Axe-Fx without Phantom Power

2-way MIDI data communication is provided via a single 5-conductor MIDI cable.
The Axe-Fx Standard, Ultra, or Axe-Fx II may be connected in this way.
 IMPORTANT: Axe-Fx Mode requires Axe-Fx firmware dated AUGUST 2010 or later. Check your unit under UTILITY:FIRMWARE
and visit http://www.fractalaudio.com/support
You must manually select MIDI under PORT in the MIDI menu before using MIDI cable connections (AXE-FX is the default)
to download a free upgrade if required.
Fractal Audio Systems MFC-101 Manual