Table of Contents
Advertisement
Fractal Audio Systems MFC-101 Manual
3.5 Performance Modes
The MFC-101 offers three different variants of PERFORMANCE MODE. These are PRESET MODE, SONG MODE, and
SET MODE. Each of the modes is covered throughout this manual. Key concepts and differences are noted in the
table below:
MODE
PRESETS
PRESET MODE:
384 Presets total are arranged in
strict numerical order
The number of preset footswitches
per Bank is set by the global Bank
Size parameter.
SONG MODE:
Uses the same 384 presets as
PRESET MODE, but arranged as
desired on the preset footswitches
for each of 100 Songs. Up to Presets
may be added to each Song, though
the global Bank Size imposes a limit
on how many of these you'll have
access to.
3
SET MODE {1-10}
:
Up to 50 Songs may be added to
each Set. Uses the same Songs as
SONG MODE, and therefore their
same Presets. If the selected Set has
a NAME, it will be shown in the
Performance Mode menu while you
are making a selection.
NOTE: You can change the Operating Mode at any time. See section 12.5.1 on p. 59 for details.
2
MFC-101 presets are numerically sequenced across banks in PRESET MODE, but the actual MIDI Program Change
commands sent by any preset may be modified freely. See Presets and Program Changes on p. 16.
3
Whereas PRESET MODE and SONG MODE are singular entries in the Operating Mode menu, there are actually 10
entries for SET MODE, one for each of the available set lists.
Doc v2.15
UP/DOWN FOOTSWITCHES
UP/DOWN footswitches step through all Banks in
2
across Banks.
strict numerical order. The number of banks
depends on the global Bank size.
UP/DOWN footswitches step through all 100
Songs in strict numerical order.
UP/DOWN footswitches step in order through the
Songs of the current Set.
BASIC SETTINGS
13
Advertisement
Table of Contents
