Table of Contents
Advertisement
Fractal Audio Systems MFC-101 Manual
12.5.20 Hold Axe-Fx Tempo for Tuner
EDIT : SETUP : PAGE
(20x)
This setting is used to enable or disable the TUNER HOLD function of the Axe-Fx Mode TAP TEMPO Instant Access Switch.
HoldAxeTap=Tuner OFF
This function allows the tuner to be invoked by holding the Axe-Fx TAP TEMPO footswitch for 2 seconds.
To disable the tuner once it is invoked by holding TAP, press the tap footswitch again.
12.5.21 Axe-Fx Instant Access Switch LED Off State
EDIT : SETUP : PAGE
(21x)
This setting is used to determine whether the LEDs of Instant Access Switches which have been assigned an Axe-Fx Function
(12.4.7) will turn RED or OFF when disengaged.
Axe-Fx IaOffLed RED
12.5.22 Save Edits Switch
EDIT : SETUP : PAGE
(22x)
This setting is used to enable or disable the
can be used to store IA Switch ON or OFF state changes to the current preset right in PERFORMANCE MODE, eliminating the
need to use the PRESET:IA SWITCH STATES menu page (12.1.4) in favor of a simple footswitch tap.
SaveEditsSwitch OFF
NOTE: Remember that IA Switches with Axe-Fx functions (see 12.4.7) are not subject to having their ON/OFF state set by the
saved settings of an MFC-101 preset. The ON/OFF and LED states for these switches defer instead to whatever the MFC-101
discovers in the actual Axe-Fx preset that has just been loaded.
Instant Access switches which set for Global operation (p. 63) will ignore the on/off states saved in MFC-101 presets.
12.5.23 Edit Menu Short/Long
EDIT : SETUP : PAGE
(23x)
This setting is used to determine whether a short tap or a long press is required to enter the EDIT menu. It is designed to
provide a "safety" to prevent accidental entry into the edit menu during a live performance.
Edit Menu SHORT
Doc v2.15
SAVE
EDIT
function of the
SETUP MENU REFERENCE
footswitch. When it is enabled, the
PAGE
or
(9x)
PAGE
or
(8x)
PAGE
or
(7x)
SAVE
footswitch
PAGE
or
(6x)
67
Advertisement
Table of Contents
