Instant Access Switches; Axe-Fx Ia Switches; Figure 5-1: Default Ia Switch Assignments In Axe-Fx Mode - Fractal Audio MFC-101 Owner's Manual

Mark ii

Hide thumbs Also See for MFC-101:

Table of Contents

Fractal Audio Systems MFC-101 Manual

5 INSTANT ACCESS SWITCHES

Instant Access (IA) Switches are typically used like traditional stompbox switches to turn effects on or off. There

are many other creative possibilities for their use. The number of footswitches assigned to IA function is

determined by the global Bank Size (see section 4.1 on p. 15). Each numbered IA Switch (1-17) is always located at

the footswitch with the same number.

Instant Access Switches on the MFC-101 function as one of two types. Axe-Fx IA Switches have "native" Axe-Fx

functions assigned (ex: "DRIVE 1 BYPASS"). They perform no other functions except as designated.

General Use IA Switches (those with their Axe-Fx functions set to NONE) send a range of general use MIDI

messages. The on/off states for IA switches of this type is stored per-preset in the MFC-101.

When Axe-Fx Mode (p. 10) is turned off, all IA Switches revert to their General Use settings.

All IA Switch settings are global—they stay the same across all presets, banks, songs, etc.

In Axe-Fx mode, IA Switches can be set up to control many functions. Default settings are shown below:

You can freely change the above settings in the MIDI menu:

1. Press EDIT footswitch to enter EDIT MODE.

2. Press MIDI footswitch to select the MIDI menu.

3. Press PAGE footswitch 6x to get to the IA Axe-Fx Functions screen:

IA01 Axe-Fx FILTER1

4. Press the INCR or DECR footswitch to select an IA Switch to edit by its number.

5. Press PARAMETER to move the cursor to the Axe-Fx Functions list.

Doc v2.15

INTERNAL CCs

Table of Contents