Ia Switch Axe-Fx Functions; Ia Switch Control Change (Cc#) Settings - Fractal Audio MFC-101 Owner's Manual

Mark ii
Hide thumbs Also See for MFC-101:
Table of Contents

Advertisement

Fractal Audio Systems MFC-101 Manual

12.4.7 IA Switch Axe-Fx Functions

EDIT : MIDI : PAGE
(7x)
The IA Switch Axe-Fx Functions setting is used to assign Axe-Fx functions to each IA Switch. These settings are in effect to the
exclusion of all other MIDI Messages for the IA Switch whenever the MFC-101 is in AXE-FX MODE.
IA01 Axe-Fx FILTER1
PARAMETER
Use the 
 footswitches to move between IA Switch Number and Axe-Fx Function parameters.
IA Switch numbers 18-41 are reserved for future use.
The list of functions which may be assigned appears in section 5.1.1 on p. 20 and is subject to the selected Axe-Fx Mode (p. 59).
˚ NOTE: As of firmware version 1.0, the MFC-101 only shows those Axe-Fx functions which are available on the model selected
in the MFC-101's Axe-Fx Mode parameter.
* NOTE: TUNER or TAP TEMPO can each be assigned to only ONE switch at a given time. If you try to assign a second switch to
one of these functions, the first will have its function changed automatically to "NONE".
TUNER and TEMPO may also share a single footswitch. See 12.5.20 on p. 67.

12.4.8 IA Switch Control Change (CC#) Settings

EDIT : MIDI : PAGE
(8x)
IA Switch Control Change Settings is used to specify the Controller Number and MIDI Channel for each of two available MIDI
Control Change (CC) commands ("c1" and "c2") that an Instant Access Switch can send both ON and OFF messages for.
IA01 c1 CC#102 Ch01
PARAMETER
Use the 
 footswitches to move between Instant Access Switch Number, Command Select, CC# Select, and
MIDI Channel parameters. Select an IA Switch, select a message to edit (c1 or c2) then set the CC# and Channel.
IA Switch numbers 18-41 are reserved for future use.
To disable either message, set its CC# to "OFF".
INSTANT ACCESS SWITCH C1 CC# DEFAULT ASSIGNMENTS:
IA
CC#
IA
1
1
7
2
2
8
3
3
9
4
4
10
5
5
11
6
6
12
NOTE: These settings for IA Switch CC# messages do not apply for IA Switches with Axe-Fx functions assigned (12.4.7) when the
MFC-101 is in AXE-FX MODE (12.5.0)
Doc v2.15
CC#
IA
CC#
7
13
123
8
14
124
9
15
125
120
16
126
121
17
127
122
MIDI MENU REFERENCE
53

Advertisement

Table of Contents
loading

Table of Contents