Table of Contents
Advertisement
PRESET MENU REFERENCE
12.1.6 Preset Custom MIDI Message
EDIT : PRESET : PAGE
Preset Custom MIDI Message is used to enter a 16 byte custom MIDI message to be sent with the selected preset.
You must first select a preset (12.1.0 on p. 41) to edit it using this menu page.
Custom 1 -- -- -- --
The 16 available message bytes are spread across 4 pages of 4 bytes each. Use the
between the Message Page Number parameter and the 4 individual Byte parameters on each page. Bytes may contain any
values in the range 0x00 to 0xFF (0 to 255).
Beginning on Message Page 1, press
PARAMETER
switches, press
filled.
st
Return to the 1
cursor position and use
enter byte data as above, continuing as needed across pages for up to 16 bytes total.
The cursor cannot be moved further right unless there is a valid data byte in the current position.
Only the data byte in the last position may be shut off.
Page 1 bytes:
1
Page 2 bytes:
5
Page 3 bytes:
9
Page 4 bytes:
13
The appendix of this manual includes a helpful primer on custom MIDI messages. See p. 75.
(6x)
PARAMETER
to select the first byte. Set the byte value with the
nd
to move to the 2
byte, and continue until you are finished or all 4 bytes of the first page are
INCR
to change to the next Message Page. Use
2
3
4
6
7
8
10
11
12
14
15
16
Fractal Audio Systems MFC-101 Manual
PARAMETER
footswitches to move
INCR/DECR
PARAMETER
INCR/DECR
and
to
Advertisement
Table of Contents
