Table of Contents
Advertisement
SETUP MENU REFERENCE
12.5.3 MFC-101 Display Offset
EDIT : SETUP : PAGE
(3x)
MFC-101 Display Offset is used to offset the numbers of MFC-101 presets so they match the preset numbers of a connected
Axe-Fx using display offset (causing its presets to be numbered 1-384 instead of 0-383).
MFC101DisplayOfst 0
NOTE: This is purely a user interface setting and does not impact MIDI output.
12.5.4 MIDI Channel Display Offsets
EDIT : SETUP : PAGE
(4x)
MIDI Channel Display Offsets is used to set up the MFC-101 so that its user interface shows program numbers beginning from
1 instead of 0 for a connected device located at a given MIDI channel.
Ch01 DisplayOffset 0
PARAMETER
The
footswitches move between MIDI Channel and Display Offset parameters.
Change this setting to 1 for the MIDI channel of any connected device which numbers its presets from 1 instead of 0.
NOTE: The MFC-101 has a separate dedicated Display Offset setting for a connected Axe-Fx (12.5.2).
NOTE: This is only a user interface setting. It makes the preset numbers shown in the MFC-101 Preset Program Change menu
(12.1.2) match the numbering of presets on a connected device. This setting does not affect MIDI output.
12.5.5 MIDI Channel Names
EDIT : SETUP : PAGE
(5x)
MIDI Channel Names is used to set "friendly" names representing the various devices connected to the MFC-101 on MIDI
Channels 1-16.
Ch 01 Name Chan 01
PARAMETER
The
footswitches move the cursor between the MIDI Channel parameter and individual characters of the
MIDI Channel Name.
The name of a selected channel appears briefly as a memory aid when the
any "Midi Channel" parameter on any MFC-101 menu page.
Fractal Audio Systems MFC-101 Manual
NAMES
footswitch is pressed while the cursor is in
Advertisement
Table of Contents
