Adding Presets To A Song - Fractal Audio MFC-101 Owner's Manual

SONGS & SETS

9.2 Adding Presets to a Song

When the MFC-101 is in SONG MODE, the up and DOWN footswitches step through SONGS instead of BANKS. See
the table on p. 13 for an overview of differences between operating modes.
A Song is similar to a Bank, except that it contains up to 15 MFC-101 Presets assigned to the numbered
footswitches in any order you choose. Songs are likewise subject to the global Bank Size and Style settings,
meaning that although you can place up to 15 Presets into the song's 15 "slots," some of these may not be
available for selection in PERFORMANCE MODE if the Bank Size is smaller than 15.
The MFC-101 stores 100 songs. To add presets to any of them:
1. Press the EDIT footswitch to enter EDIT MODE.
2. Press SONG/SET footswitch to arrive at the Song Edit screen:
Song 001 P01 = P001
3. Press the INCR or DECR footswitches to select a song to edit.
4. Press the PARAMETER footswitch to move to the Song Preset (aka "slots") field.
5. Press INCR or DECR to select a Song preset slot.
Song presets always appear at the identically numbered footswitch.
A value of "OFF" (the default) results in a preset footswitch which does nothing.
6. Press the PARAMETER footswitch to move to the Select Preset field.
7. Press the INCR or DECR footswitches to select a preset for the selected slot, or select OFF if you
want the selected slot to contain NO song.
8. Use the PARAMETER and INCR/DECR footswitches to move between selecting slots and
assigning presets.
9. Press EXIT to return to PERFORMANCE MODE.
NOTE: You can also edit the NAME of each song. See 12.2.1 on p. 47 for details.
Fractal Audio Systems MFC-101 Manual