Table of Contents
Advertisement
PRESET MENU REFERENCE
12.1.2 Preset Program Changes
EDIT : PRESET : PAGE
Preset Program Changes is used to set the MIDI Program Change (PC) messages sent by the currently selected MFC-101 preset.
One program change may be set per MIDI channel, up to 16 in total.
You must first select a preset (12.1.0 on p. 41) to edit it using this menu page.
Ch 01 ProgChg 000
PARAMETER
Use the
footswitches to move between MIDI Channel and Program Number parameters.
Note that while AXE-FX MODE is ON, the saved Program Change command for the "Axe-Fx MIDI Channel" (12.4.1) will be
IGNORED. Instead, the "Axe-Fx Preset Transmit Map" (p. 12.4.3) determines which Bank Select and Program Change
commands will be sent.
To support program changes from 000-999 with a single parameter, the MFC-101 automatically sends a Bank Select (CC#0)
command preceding the actual program change command, as follows:
Program Range
Bank Select
000-127
128-255
256-383
384-511
The actual program change number is the remainder of the value as set, divided by 128. For example, take an MFC-101
Program Change value setting of 200. 200/128 = 1, remainder of 72. The BANK SELECT message will be 1 and the PROGRAM
CHANGE will be 72.
12.1.3 Alternate Preset
EDIT : PRESET : PAGE
The Alternate Preset selection for any preset loads on alternate presses of its footswitch. This allows you, for instance, to
switch to a "Lead" sound by stomping on the footswitch of a "rhythm" sound. Pressing the same footswitch again goes back to
the original preset.
Alternate Preset GBL
Possible choices include:
GBL: Loads the Global Preset (12.5.19), which may be set to a number, to OFF, or to Backtrack.
000-383: Loads a specific MFC-101 preset by its number.
OFF: The Alternate Preset function will be disabled for this preset.
BAK: Loads whichever preset was selected prior to the current one.
While the alternate preset is loaded, the number portion of its name display will show ALT, GBL, or BAK.
To return to the "main" preset from an alternate, step again on the selected footswitch.
(2x)
Program Range
0
512-639
1
640-767
2
768-895
3
896-999
(3x)
Fractal Audio Systems MFC-101 Manual
Bank Select
4
5
6
7
Advertisement
Table of Contents
