Transmission/Reception Mode Options - Konica Minolta FK-102 User Manual

Table of Contents

Advertisement

Transmission/Reception Mode Options

These are the options on the initial values of transmission and reception modes.
• Transmission mode:
• Reception output mode
• 2 in 1 print:
• Shifting to power save:
• Inch paper priority:
• Rx Paper selection
• Reduction for record
• Page divided print
• Rx feed tray (fix)
• Polling Tx file delete:
10-22
Quick Tx / Memory Tx *
This parameter determines the initial value of transmission
mode.
*1
: After all * / Every page
This parameter determines the timing at which the document
received should be printed out. If you select "On receiving all
pages", printout will be produced after all pages are received. If
"On receiving every page" is selected, printout will be produced
page by page.
OFF* /ON
When ON is selected, each pair of pages of the original docu-
ment will be printed on a page in the form of 2-in-1.
Normal * / Immediate (1 minute)
Suppose you have selected "Immediate (1 minute)" for your FK-
102 and it is in power save mode when input signals come.
Then your FK-102 will resume power save mode "immediately
(in 1 minute)" after completion of reception.
ON*/OFF
By setting "OFF", the unit gives Paper choices priority to stan-
dard sizes A and B.
*2
:
Automatic * / 8.5"x11" priority / 8.5"x11" fix / 8.5"x14" priority /
8.5"x14" fix / 11"x17" priority / 11"x17" fix
If a "priority" size is specified, paper size will be selected with
priority given to that size. If "Automatic" is selected, the paper
size that is the closest to the original size will be taken.
If a "fixed" size is specified, only the specified size will be used
but not any other.
*3
:
96% */ 95% / 94% / 93% / 92%/ 91%/ 90%/ 89%/ 88%/ 87%/
100%
This parameter determines the rate of reduction in size in repro-
ducing the document image.
*4
:
OFF* /ON
When ON is selected and your FK-102 receives a page longer
than the fixed size, it will be divided into more than one page.
*5
:
Automatic*/ Tray 1/ Tray 2/ Tray 3/ Tray 4
YES * / NO
This parameter determines whether to delete document after
the polling transmission.

Advertisement

Table of Contents
loading

Table of Contents