Report Output Set - Konica Minolta FK-102 User Manual

Report Output set

You may select the Report output set to be On or Off. This settings prints the reports of communi-
cation management, communication result and reservation, and the input/output trays for the
reports. If ON is selected, the manner of printing may also be selected.
• Communication Journal:
• Transmission report:
• Sequential Tx report:
• Tx reservation report:
• Confidential Rx report:
• Bulletin Tx report:
• Relay Tx result report:
• Relay Request Rx report:
• PC-Fax Tx Error Report:
• Sync. Result Rpt output:
• Tx result report select:
• Paper tray for reports:
* indicates factory default setting.
FOR DETAILS
•
Select ON in "Tx result report select screen," the transmission report will be printed if YES
is selected. The report will not be printed if NO is selected.
•
Tray used depends on trays installed.
1.
Open the Fax Key Operator Mode (See "Entering Key Opera-
tor" (p. 10-2)).
OFF / Daily / 100 com.* / 100 & Daily
Always / Only error * / OFF
ON* / OFF
ON* / OFF
ON* / OFF
ON* /OFF
ON* /OFF
ON* /OFF
ON* /OFF
All stn* / each stn
ON / OFF*
Tray 1 / Tray 2* / Tray 3 / Tray 4 / Bypass
Key Operator
Screen
FAX Key
Operator Mode
FAX Screen Set
Setting FAX ID/
Name
Sender
Information/
Reception Time
Line Parameter
Set
Transmission/
Reception Mode
Options
10
Key Operator
PBX
Connection
Mode Options
Report Output
set
Initializing the
FAX Image
Memory
Setting a
Special
Parameter
Function Set
10-27