Sequential Polling Reception Result Report; Bulletin Board Transmission Report; Pc-Fax Tx Error - Konica Minolta FK-102 User Manual

Sequential Polling Reception result Report

The result of polling to multiple remote stations is printed out automatically.
Automatic printout can be set to ON or OFF with [Sequential Tx report] at [Report output set] of
Key Operator mode. For details, see "Report Output set" (p. 10-27).
REMOTE STATION: .....The following is shown.
START:.........................The time at which communication started.
TIME: ...........................The required time for the communication is shown.
Pages:..........................The number of pages transmitted.
RESULT: ......................OK
Remote station name when remote station name is registered in
abbreviated dialing; and,
Telephone number of remote station.
Shown when communication ended normally.
S-OK Shown when communication was terminated.
NG Shown when a communication error has occurred.
Busy Shown when unable to complete communication due to the
line being busy.
No ans Shown when the remote station being called did not answer.
TEL Shown when there has been an incoming telephone call.
Cont Shown when an error has occurred and the FK-102 has
switched to error page redialing.
M-full Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF Shown when the power switch is turned off.
Types of
Reports and
Lists
Communica-
tion Journal
Transmission
Reservation
Report
Transmission
Report
Polled Transmit
Reserve Report
Polling
Transmission
Result Report
Sync Transmit
Reservation
Report
Sync Transmit
Result Report
Polled
Reception
Result Report
Sequential
Polling
Reception
Sequential
Polling
Reception result
Confidential
Reception
Report
Bulletin Board
Transmission
Report

PC-Fax Tx Error

Report
Relay Request
Reception
Report
Relay Sync
Transmit Result
Report
Abbreviated
Dialing List
11
Explanation of
Reports and
Lists
Program Entry
List
Group Dial List
FAX Setting List
11-17