Konica Minolta FK-102 User Manual page 232

FAX Key Operator Mode - (continued)
Report output set
Sets the method to print a report. (p. 10-27)
Item
Communication
Journal
Transmission
report
Sequential Tx
report
Tx reservation
report
Confidential Rx
report
Bulletin Tx report
Relay Tx result
report
Relay request Rx
report
PC-FAX Tx Error
Report (With
Optional Print Con-
troller)
Sync. Result Rpt
output
Tx result report
select
Paper tray for
*1
report
*1
: Tray type may be different depending on the installed option.
* indicates factory default setting.
10-10
Description
Determines whether to print the report and
the timing at which the report will be printed
out.
Determines how to print the synchronous
result report. If you select "All stn", all of the
reports will be printed out after all transmis-
sions are completed. If "each stn" is selected,
the report will be printed out after each trans-
mission.
Determines whether to display the transmis-
sion result report select screen. If you select
"ON", it will be displayed after each transmis-
sion.
Specifies the paper tray used to print out a
report.
Available value
OFF / Daily / 100 com.* /
100 & daily
Always / Only error* / OFF
ON* / OFF
ON* / OFF
ON* / OFF
ON* / OFF
ON* / OFF
ON* / OFF
ON* / OFF
All stn* / each stn
ON / OFF*
Tray 1 / Tray 2* / Tray 3 /
Tray 4 / Bypass