Table of Contents
Advertisement
Polling Transmission Result Report
The result of a polling transmission prints out automatically.
Automatic printout can be set to ON or OFF with [Communication Journal] at [Report output set]
of Key Operator mode. For details, see "Report Output set" (p. 10-27).
REMOTE STATION: .....The ID of the remote station machine.
START:.........................The time at which communication started.
TIME: ...........................The required time for the communication.
Pages:..........................The number of pages transmitted. In the case of memory transmis-
RESULT: ......................OK
REMARKS: ..................POL is shown.
sion, the number of pages able to be transmitted and the total number
of pages are shown in the form of a fraction.
Shown when communication ended normally.
S-OK
Shown when communication was terminated.
NG
Shown when a communication error has occurred.
Busy
Shown when unable to complete communication due to
the line being busy.
No ans
Shown when the remote station being called did not
answer.
TEL
Shown when there has been an incoming telephone call.
Cont
Shown when an error has occurred and the FK-102 has
switched to error page redialing.
M-full
Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF
Shown when the power switch is turned off.
Types of
Reports and
Lists
Communica-
tion Journal
Transmission
Reservation
Report
Transmission
Report
Polled Transmit
Reserve Report
Polling
Transmission
Result Report
Sync Transmit
Reservation
Report
Sync Transmit
Result Report
Polled
Reception
Result Report
Sequential
Polling
Reception
Sequential
Polling
Reception result
Confidential
Reception
Report
Bulletin Board
Transmission
Report
PC-Fax Tx Error
Report
Relay Request
Reception
Report
Relay Sync
Transmit Result
Report
Abbreviated
Dialing List
11
Explanation of
Reports and
Lists
Program Entry
List
Group Dial List
FAX Setting List
11-11
Advertisement
Chapters
Table of Contents
